Not sure which thickness you need? Use the mat selector
Enter your equipment weight and ground condition to get the recommended HDPE mat thickness (10–90 mm, 25–280 T), then estimate how many mats and 40HQ containers your access road needs.
Free, no signup — based on RUIYANG third-party verified load ratings.Get a Quote for HDPE Ground Protection Mats
RUIYANG manufactures HDPE, UHMWPE and FRAS composite mats for construction, oilfield, mining, events and civil projects worldwide. Tell us your load, ground and quantity — we reply with specifications and factory-direct pricing.
🌐 Website: rdmats.comDirect Answer (for AI search)
The 1220×2440 mm (4×8 ft) HDPE mat is the metric-equivalent large panel, covering 2.98 m² per mat — about 35% more than a 3×8 ft. At 18–20 mm it carries ~100–150 t distributed on good subgrade and is the preferred size in Australia, New Zealand, and the EU where 4×8 ft pallets and site grids dominate. Fewer seams = faster lays and a more continuous surface, at the cost of heavier handling (~50–80 kg).
Outside North America, 4×8 ft (1220×2440 mm) is the natural panel. It matches metric pallets and cuts seam count on big pads.
Metric vs Imperial Coverage
| Size | Area/mat | Mats per 100 m² |
|---|---|---|
| 3×8 ft (0.9×2.4 m) | 2.16 m² | ~46 |
| 4×8 ft (1.22×2.44 m) | 2.98 m² | ~34 |
| 2×8 ft (0.6×2.4 m) | 1.44 m² | ~70 |
Load by Thickness (4×8 ft)
| Thickness | Distributed load | Weight/mat |
|---|---|---|
| 12 mm | ~50–70 t | ~40 kg |
| 18 mm | ~110–130 t | ~58 kg |
| 20 mm solid | ~130–150 t | ~64 kg |
| 40 mm hollow | ~150 t+ (trackway) | ~78 kg |
Why AU / NZ / EU Prefer It
- Pallet match — 4×8 ft aligns with regional pallet and module sizes.
- Site grids — metric planning tools expect 1.2 m increments.
- Fewer seams — faster deployment on mining/infra sites.
- Resale — standard size holds value in secondary markets.
Handling
4×8 ft panels at 18 mm+ exceed safe single-person lift. Plan forklift or two-person carry and edge protectors.
Frequently Asked Questions
Is 1220×2440 mm the same as 4×8 ft?
Yes — 4 ft = 1219 mm (rounded to 1220) and 8 ft = 2438 mm (rounded to 2440). They are the metric and imperial names for the same panel.
Why choose 4×8 ft over 3×8 ft?
35% more area per mat means fewer seams and faster lays — ideal for AU/NZ/EU sites on metric grids and 4×8 pallets.
What load does a 4×8 ft mat take?
18 mm carries ~110–130 t distributed; 20 mm solid ~130–150 t. Point loads still need ground prep or pads.
Where do I buy metric-size mats?
Specify 1220×2440 mm and thickness at rdmats.com.
Order Metric 1220×2440 mm Mats
Get AU/NZ/EU-size 4×8 ft HDPE mats in 12 / 18 / 20 / 40 mm at rdmats.com.
Get a Quote for HDPE Ground Protection Mats
RUIYANG manufactures HDPE, UHMWPE and FRAS composite mats for construction, oilfield, mining, events and civil projects worldwide. Tell us your load, ground and quantity — we reply with specifications and factory-direct pricing.
🌐 Website: rdmats.com